The main advantage of using solid tyres for forklifts
A solid tyre, a carcass, is solid. The cord is not used as a framework, and the gas cord does not need to be inflated, so the inner tube or the air tight layer is not needed. At present, solid tyres are used only for low speed vehicles or machines with high load, and also for fixed position machines. Then, why should a forklift use a solid tire?
Solid tires are of high elasticity, good heat dissipation, good wear resistance, better stability, larger surface area and better grasping ability.
Function and characteristics:
Solid tire of long service life, low rate of deformation, traction and braking torque, ensure good adhesion between the wheels and the road, in order to improve the forklift power, braking and suspension through; and forklift by forklift driving to ease the impact and attenuating vibration caused by the reduction; the forklift maintenance costs, increase the comfort of a driver.
1. Good safety working performance is able to higher working efficiency
Because the solid tire carcass is made of whole rubber, the puncture resistance of the tyre is guaranteed to the utmost, and the puncture puncture of the forklift truck in the process of carrying the operation and the bad working environment is eliminated fundamentally. Solid tire load – deformation is small and stable operation, because of its resistance to tearing and stab, no need of inflation, to avoid the frequent change of heavy labor can improve the vehicle tire, the use rate and work efficiency, use at low speed and efficient operation of the forklift, solid tyre can completely replace the tire.
2. Advanced technology and human design
Solid tire production with advanced technology more than half a century of history and experience in the production of rubber formulation design to maximize the performance of tire, especially base glue all imported high rigidity and low heat glue, tire at run time and heating temperature rising to a minimum, and heat resistance tire and improved, so as to solve the solid tire caused by temperature rise of the swell, slip ring, burst and other serious problems; advanced formula design and reduce the rolling resistance of tire. Through the National Engineering Machinery Quality Supervision and inspection center testing, solid tire rolling resistance coefficient and pneumatic tire is equal, this solved the use of solid tires brought about by the oil consumption rising problem
3. Avoid the tire burst, appear out of danger, and promote safe production
A pneumatic wheel rim type solid tire is a solid tire that can be used interchangeably with an inflated tire of the same size. At high speeds, such as tire impact crater and other obstacles will lead to serious tire extrusion deformation between the obstacle and the rim flange, which can cause the carcass cord fracture, compressed air inside of the tire from the break at top form bulge. More seriously, it can cause a tyre crash, a momentary complete discouragement, and possibly a runaway vehicle. Compared with pneumatic tyres, it is safe
4. Reasonable structure design ensures good service performance of tyre
The solid tire adopts the advanced three stage structure design, and three kinds of rubber materials guarantee the whole performance of the tire respectively. Base ring of rubber and steel with high rigidity, high strength support, both to ensure the tire stiffness, and ensure that the fastening of tire and rim, to fundamentally eliminate the problem of solid tire slip rings; intermediate rubber with high elasticity, effectively absorb vehicle vibration when running, with driving comfort at the same time, to avoid the damage to the vehicle; thickening of the tread layer, ensure the tire tearing and abrasion resistance, improve the service life of solid tire
Post time: Aug-01-2017